PT Calendar Version 3 Install

From ADF Docs
Revision as of 04:34, 20 October 2012 by Gcronkright (talk | contribs) (Management Pages)
Jump to: navigation, search

Back to PT Calendar

IMPORTANT: v3.0 HAS NOT BEEN RELEASED!!

Download

Download the Calendar Application from the Community Site Project or from the SVN Repository.

Extract the zip files into the following directory: /ADF/apps/pt_calendar/

Site Configuration

The Calendar Application is built within the ADF. The ADF 1.5.3 or greater must be installed in the site to run the Calendar Application, follow the ADF Installation instructions.

  • Make sure the ADF is setup and running on the site. If the ADF is not setup, then follow the instructions for ADF Installation.
  • Open the sites 'ADF.cfc' (See Site Configuration (ADF.cfc) for more info) file (located in your site's /_cs_apps/ directory) in a text editor. Locate the Load the ADF Application into application space comment in the file. Add (or uncomment) the following command under the comment section:
loadApp("ptCalendar");

Styles

There are several out of the box style options for the Social Media application. Most of the styles are defined in the following style sheets located in the /style directory within the ADF Social Media App directory:

  • /ADF/apps/pt_calendar/style/calendar.css

You have two options: you can either load them into your Base Plus One (recommended) or your can load them into the Calendar Templates you create.

Note: the classes and styles defined for the Calendar app are targeted tightly for the layout generated by the Social Media application and should not interfere with your site styles. However, it is a good idea to give these styles sheets higher precedence in your style definitions.

Import Custom Elements

The Calendar App has several Custom Components defined within CommonSpot. These components are available in the Calendar's "exported-objects" folder located at the root of the ptCalendar application directory (e.g. /ADF/apps/pt_calendar/exported-objects/)

To import these objects, you will need to be an administrator for your site.

Create a "PT Calendar App Elements" category and import all portions of each component in the order listed.

Import Custom Elements:
Global Custom Elemnts

  1. ptCalendar Configuration (ptCalendar-Configuration-Custom-Element.zip)
  2. Calendar Page Mapping (Calendar-Page-Mapping-Custom-Element.zip)
  3. Calendar Organizations (Calendar-Organizations-Custom-Element.zip)
  4. Calendar Event Recurrence (Calendar-Event-Recurrence-Custom-Element.zip)
  5. Calendar Event Details (Calendar-Event-Details-Custom-Element.zip)
  6. Calendar Event DateTime (Calendar-Event-DateTime-Custom-Element.zip)
  7. Calendar Event Categories (Calendar-Event-Categories-Custom-Element.zip)

Local Custom Elements

  1. Calendar Display Properties (Calendar-Display-Properties-Custom-Element.zip)

Verify Imports

The imported components' render handlers and custom field types must be verified. During the import process, the render handler and custom field types paths may have been changed to reflect the current site's path.

Review and update these paths to reference the ADF path. In most cases, this will just require to be unlocked and a change in the path from the site name to 'ADF'. Check the paths for the custom field types that were imported with the custom elements by unlocking them and fixing the explicit paths to point to "/ADF/extensions/".

If the custom elements that are imported contain custom field types that are already in the site, the naming convention for the custom field type will be unique. To resolve this, unlock the field types and elements, and reassign the element field type to the pre-existing field type.

Example: The Calendar Event Categories custom element contains the General Chooser field type, if the General Chooser field type is already installed on the site then the import process will attempt to import another General Chooser but with a new name such as "General Chooser_import_1250003208472." To resolve this issue, open the custom element and assign the field type (General Chooser_import_1250003208472) to the field type with the simple name General Chooser. After reassigning the field type, delete the new imported field from the list of custom field types.

App Configuration

The Calendar App uses a custom element to store site specific configurations.


Here is a list of most of the available configuration fields:

General Tab

  1. New Event URL - Site relative URL for a public facing form page for submitting a new Event requests. (Example: /new-event-form.cfm)
  2. CS USERS DSN - Where the Calendar will get the Users info for event category notifications. (Default: commonspot-users)
  3. Send New Event Emails to Category Notification Users -
  4. Event Notification From Address - The 'From' email address of the notification email sent to event category users
  5. Event Notification Email Subject - The subject of the notification email sent to event category users
  6. Event Notification Email Message - The standard message for the notification email sent to event category users
  7. Send Event Approved Email to Contact -
  8. Event Approved Label -
  9. Event Approved Email Message -
  10. Send Event Denied Email to Contact -
  11. Event Denied Label -
  12. Event Denied Email Message -

View Page

  1. calendarViewPageMode -
  2. calenderViews -
  3. defaultCalendarView -
  4. calendarViewParamName -

Rendering and Display Tab

  1. App UI Theme - The Calendar app utilizes jQueryUI Themes for styling of buttons, etc. There are some pre-installed themes that come with the ADF in the Thirdparty folder.
  2. Use Event Details Tooltip - The Calendar app utilizes jQuery qTip for event detail tooltips. (Default: Yes)
  3. Event Details ToolTip Theme - If using event detail tooltips, select one of the 6 pre-packed themes. (Default: Cream)
  4. Calendar Small Grid Cell Width - (Default: 30)
  5. Calendar Small Grid Cell Height - (Default: 24)
  6. Calendar Large Grid Cell Width - (Default: 130)
  7. Calendar Large Grid Cell Height - (Default: 150)
  8. ColdFusion Date Mask - ColdFusion Date Mask used for the display of dates. DateFormat on cfquickdocs.com (Default: M/D/YYYY)
  9. ColdFusion Time Mask - ColdFusion Time Mask used for the display of times. TimeFormat on cfquickdocs.com (Default: h:mm tt)
  10. ColdFusion Long Date Mask - ColdFusion Date Mask used for the display of long or full dates. DateFormat on cfquickdocs.com (Default: yyyy)
  11. Broken Recurrence Event Suffix - Text that is appended to the end of the title of a broken recurrence event that was created from a recurrence pattern. (Default: blank)
  12. Copy Event Suffix - Text that is appended to the end of the title of a copied event. (Default: - Copy)

Performance and Debugging Tab

  1. Enable Event Cache - (Default: No)
  2. Calendar Cache Type - (Default: blank)
  3. Calendar Cache DSN - (Default: blank)
  4. Enable Verbose Output - (Default: No)

Note: The app configuration fields not listed here should NOT need to be modified from their default values.

IMPORTANT: Follow the steps below to configure the App UI Theme Field for your site.

Configure the App UI Theme Field

  1. Go to your CommonSpot Site Administration
  2. From the menu on the left open Element & Forms
  3. Click Elements
  4. A Manage Elements window will open
  5. From the Category drop down filter the list elements by selecting the Calendar App Elements
  6. Click the Filter button
  7. Scroll to the bottom of the Calendar App Elements list
  8. Find the ptCalendar Configuration global custom element
  9. Click the "Lock" icon to unlock the ptCalendar Configuration Element
  10. Click the "Pencil" icon and select field definitions to open the configuration fields
  11. A 'Custom Element Field Definitions' window will open
  12. Go to the 'Rendering and Display' tab
  13. Edit the 'App UI Theme (ui_theme)' field that uses the UI Theme Selector CFT
  14. Click the 'Other Properties' Tab
  15. From the "Select an installed jQuery UI Version:" drop down list select the latest jQuery UI library that is available in your install of the ADF. (ie. jquery-ui-1.8)
  16. Click Save

Subsites

It is highly recommended to have a Web Admin subsite that contains a Calendar subsite that will contain the Management pages for the calendar administrators. This allows security to be setup for the subsite to allow only administrators access for the webadmin subsite.

Your site may already have a webadmin subsite. The steps below will add a calendar subsite into the webadmin subsite.

Web Admin

The Calendar Web Admin subsite will be used house the Calendar Management Pages.

  1. If it does not exist, create a new subsite under the site root called webadmin.
  2. Create a new subsite under webadmin called calendar.
  3. Configure the /webadmin/calendar/ subsite Content Security to give 'No Rights' to 'Anonymous Users' and 'Authenticated Users'.
  4. Configure the /webadmin/calendar/ subsite Content Security to give permissions to the group of administrators who will manage the Calendar.

Calendar

The Calendar subsite will be used house the Calendar Display Pages.

  1. Create a new subsite under the site root called calendar for an "all events" version of the calendar.
  2. Create additional subsites under the calendar subsite for any organizations that will have filtered versions of the calendar.

Templates

Web Admin Template - Optional

The Web Admin template will be used to render web admin management pages.

  1. If it does not exist, create a CommonSpot page called 'Web Admin' from the Base Plus One template. (The subsite for this is not critical but it may be a good idea to place this template int the webadmin subsite.)
  2. Submit and activate the page.
  3. Save the page as a template.
  4. Submit the template for public use.

Calendar Template - Optional

The Calendar template will be used to render Calendar display pages.

  1. Create a CommonSpot page called 'Calendar' from the Base Plus One template. (The subsite for this is not critical but it may be a good idea to create this template in the 'calendar' subsite.)
  2. Submit and activate the page.
  3. Save the page as a template.
  4. Submit the template for public use.

Management Pages

Create these 7 Admin pages:

  1. CCAPI Configuration
  2. Manage App Configuration Page
  3. Manage Calendar Organizations Datasheet
  4. Manage Event Categories Datasheet
  5. Manage Events Datasheet
  6. Manage Events Grid
  7. Manage Page Mappings Datasheet - Optional


CCAPI Configuration

The Calendar Application uses the ADF CCAPI to populate and modify the calendar app element records. The CCAPI needs to be configured to handle this calendar functionality.

First, follow the steps to set up the CCAPI Config file for the site. Once that configuration is complete, follow the steps below to set up the CCAPI config for the Photo Gallery application. Make sure to update the wsVars section with the correct URLs and username/password.

  1. Create a new page called 'ccapiCalendar'. Recommend creating this page in the /webadmin/calendar/ subsite.
  2. Add each of the following Forums elements to the page:
    1. Calendar Event Details
    2. Calendar Event DateTime
    3. Calendar Event Recurrence
    4. Calendar Event Categories
    5. Calendar Organizations
  1. For each element that was added, click on the element indicator and go to 'more...'. Select 'Name' from the menu.
  2. In the Element Name field, enter the appropriate name for each element:
    1. ccapiCalendarEventDetailsElement
    2. ccapiCalendarEventDateTimeElement
    3. ccapiCalendarEventRecurrenceElement
    4. ccapiCalendarEventCategoriesElement
    5. ccapiCalendarOrganizationsElement
  1. Publish this page and view in read mode.
  2. Edit the 'ccapi.cfm' file for the site and add the following xml blocks into the <elements> section:
    1. an example 'ccapi.cfm' file is in the pt_calendar > site-files > _cs_apps > config folder
<CalendarEventDetails>
  <pageID>####</pageID>
  <subsiteID>##</subsiteID>
  <elementType>custom</elementType>
  <controlName>ccapiCalendarEventDetailsElement</controlName>
</CalendarEventDetails>
<CalendarEventDateTime>
  <pageID>####</pageID>
  <subsiteID>##</subsiteID>
  <elementType>custom</elementType>
  <controlName>ccapiCalendarEventDateTimeElement</controlName>
</CalendarEventDateTime>
<CalendarEventRecurrence>
  <pageID>####</pageID>
  <subsiteID>##</subsiteID>
  <elementType>custom</elementType>
  <controlName>ccapiCalendarEventRecurrenceElement</controlName>
</CalendarEventRecurrence>
<CalendarEventCategories>
  <pageID>####</pageID>
  <subsiteID>##</subsiteID>
  <elementType>custom</elementType>
  <controlName>ccapiCalendarEventCategoriesElement</controlName>
</CalendarEventCategories>
<CalendarOrganizations>
  <pageID>####</pageID>
  <subsiteID>#</subsiteID>
  <elementType>custom</elementType>
  <controlName>ccapiCalendarOrganizationsElement</controlName>
</CalendarOrganizations>

To populate the <pageID> and <subsiteID> tags, view the 'source' code for the 'ccapiCalendar' page that was just created.

Identify the following line in the source code and enter this numeric value into the <subsiteID> tag:

     var jsSubSiteID = ##;

Identify the following line in the source code and enter this numeric value into the <pageID> tag:

     var jsPageID = ####;

Reset the ADF

Manage App Configuration Page

The Calendar Configuration Page will be used to manage the ptCalendar Configuration custom element. Follow these steps to configure the datasheet and page for adding the configuration settings.

  1. Create a new page called Manage Configuration in the /webadmin/calendar/ subsite.
  2. In the main content of the page, add a Custom Script element.
  3. Enter the explicit module path for:
    • /ADF/apps/pt_calendar/customcf/manage_configuration_header.cfm
  4. Publish the page.

Create a Calendar Configuration Record We are creating a single Calendar Configuration element record to be used within the application.

  1. Click the Add Configuration button
  2. You can update the following fields:
    1. General Tab
      1. New Event URL - clear this default entry (Only used if you have a public or non-admin event request form.)
      2. Event Notification From Address - add a valid FROM address
    2. View Page
      1. Calendar View Page Mode - set this option to 'Single'
      2. Calendar Views - make sure all 5 options are checked
      3. Default Calendar View - select MonthGrid (you can change this later)
    3. Rendering and Display Tab
      1. App UI Theme - select a UI theme
      2. Default Calendar View - select a default calendar view
    4. Performance and Debugging Tab
      1. Enable Event Cache - Uncheck the event cache option. (This option will be re-enabled later in the install process.)
  3. Submit the form to create a configuration record.

Doing this will save the default field values in the configuration record of the custom element.

See the App Configuration portion of this page for more information on the fields and the correct values.

Reset the ADF

Manage Calendar Organizations Datasheet

The Calendar Organizations element is a global custom element. Managing data for global custom elements can be configured easily through the use of Datasheets. The following steps will describe how to configure the datasheet to manage the Event Organizations element data.

  1. Create a new page called 'Manage Calendar Organizations' from the Base Plus One (or a Web Admin template) and in the /webadmin/calendar/ subsite.
  2. In the main content of the page, add a Custom Script element.
  3. From the Custom Script element interface, click the "Edit" icon.
  4. Enter the following text into the Explicit Module path:
    • /ADF/apps/pt_calendar/customcf/manage_calendar_organizations_header.cfm
  5. From the Datasheet element interface, click the "Datasheet" icon.
  6. From the "Datasheet Views" dialog, follow the "Click here to create a new datasheet view" link.
  7. Enter the following information and then click "Next":
    1. Name: All Event Organizations View
    2. Private: unchecked
    3. Default View: checked
    4. Description: View to manage All Event Organizations
    5. Datasheet Source: Form Result/Custom Element Sheet
  8. From the Datasheet Source dialog choose the "Calendar Organizations" custom element and click "Next".
  9. From the Datasheet View Columns Dialog select the columns UniqueID, Name, Ordinal and Active from the Available Columns list and move them to the Selected Columns list and then click "Finish".
  10. You will be brought to the Datasheet View page; click "Close" to return to your page.
  11. You will see the datasheet element on this page now. Click the Datasheet element interface icon again and this time choose "Edit Columns".
  12. Within the Datasheet View Column Properties dialog choose the UNIQUEID column and click "edit":
    1. In the Render Handler field, select the 'Change' button. Enter the following value into the Explicit Module text box:
      • /ADF/extensions/datasheet-modules/1.0/edit-delete.cfm
    2. Click Finish or Save.
    3. In the Header field, switch the text to 'Edit/Delete'
    4. Click Finish or Save
  13. Now within the Datasheet View Column Properties dialog choose the ACTIVE column and click "edit":
    1. In the Render Handler field, select the 'Change' button. Enter the following value into the Explicit Module text box:
      • /ADF/extensions/datasheet-modules/1.0/value-to-yes-no.cfm
    2. Click Finish or Save
    3. In the Header field, switch the text to 'Active'
    4. Click Finish
  14. Close the Edit Column window.
  15. Go back to the Datasheet element interface, select the Layout button
    1. Default Sorting = NAME Ascending
    2. Uncheck "Show Alphabet Characters for Filtering"
    3. Uncheck "Allow JavaScript data sorting"
    4. Click Save
  16. Publish this page.

Manage Event Categories Datasheet

The Calendar Event Categories element is a global custom element. Managing data for global custom elements can be configured easily through the use of Datasheets. The following steps will describe how to configure the datasheet to manage the Event Categories element data.

  1. Create a new page called 'Manage Event Categories' from the Base Plus One (or a Web Admin template) and in the /webadmin/calendar/ subsite.
  2. In the main content of the page, add a Custom Script element.
  3. From the Custom Script element interface, click the "Edit" icon.
  4. Enter the following text into the Explicit Module path:
    • /ADF/apps/pt_calendar/customcf/manage_event_categories_header.cfm
  5. From the Datasheet element interface, click the "Datasheet" icon.
  6. From the "Datasheet Views" dialog, follow the "Click here to create a new datasheet view" link.
  7. Enter the following information and then click "Next":
    1. Name: All Event Categories View
    2. Private: unchecked
    3. Default View: checked
    4. Description: View to manage All Event Categories
    5. Datasheet Source: Form Result/Custom Element Sheet
  8. From the Datasheet Source dialog choose the "Calendar Event Categories" custom element and click "Next".
  9. From the Datasheet Columns Dialog select the columns CatID, Name', CategoryIcon, OrgIDlist, Active and NotificationUserIDs from the Available Columns list and move them to the Selected Columns list and then click "Finish".
  10. You will be brought to the Datasheet View page; click "Close" to return to your page.
  11. You will see the datasheet element on this page now. Click the Datasheet element interface icon again and this time choose "Edit Columns".
  12. Within the Datasheet View Column Properties dialog choose the CatID column and click "edit":
    1. In the Render Handler field, select the 'Change' button. Enter the following value into the Explicit Module text box:
      • /ADF/extensions/datasheet-modules/1.0/edit-delete.cfm
    2. Click Finish or Save.
    3. In the Header field, switch the text to 'Edit/Delete'
    4. Click Finish or Save
  13. Now within the Datasheet View Column Properties dialog choose the Name column and click "edit":
    1. In the Render Handler field, select the 'Change' button. Enter the following value into the Explicit Module text box:
      • /ADF/apps/pt_calendar/datasheet-modules/convert-cat-names-with-icon.cfm
    2. Click Finish or Save.
  14. Now within the Datasheet View Column Properties dialog choose the CategoryIcon column and click "edit":
    • Hidden: Checked
    1. Click Finish or Save.
  15. Now within the Datasheet View Column Properties dialog choose the OrgIDList column and click "edit":
    1. In the Render Handler field, select the 'Change' button. Enter the following value into the Explicit Module text box:
      • /ADF/apps/pt_calendar/datasheet-modules/convert-id-list-to-org-names.cfm
    2. Click Finish or Save.
    3. In the Header field, switch the text to 'Organizations'
    4. Click Finish or Save
  16. Now within the Datasheet View Column Properties dialog choose the ACTIVE column and click "edit":
    1. In the Render Handler field, select the 'Change' button. Enter the following value into the Explicit Module text box:
      • /ADF/extensions/datasheet-modules/1.0/value-to-yes-no.cfm
    2. Click Finish or Save
  17. Now within the Datasheet View Column Properties dialog choose the NotificationUserIDs column and click "edit":
    1. In the Render Handler field, select the 'Change' button. Enter the following value into the Explicit Module text box:
      • /ADF/apps/pt_calendar/datasheet-modules/manage-convert-id-list-cs-usernames.cfm
    2. Click Finish or Save.
    3. In the Header field, switch the text to 'Notify Users'
    4. Click Finish or Save
    5. Click Finish or Save
  18. Close the Edit Column window.
  19. Go back to the Datasheet element interface, select the Layout button
    1. Default Sorting = NAME Ascending
    2. Uncheck "Show Alphabet Characters for Filtering"
    3. Uncheck "Allow JavaScript data sorting"
    4. Click Save
  20. Publish this page.

Manage Events Datasheet

The Calendar Event Details element is a global custom element. Managing data for global custom elements can be configured easily through the use of Datasheets. The following steps will describe how to configure the datasheet to manage the Calendar Events.

  1. Create a new page called 'Manage Calendar Events' from the Base Plus One (or a Web Admin template) and in the /webadmin/calendar/ subsite.
  2. In the main content container of the page, add a Custom Script element.
  3. From the Custom Script element interface, click the "Edit" icon.
  4. Enter the following text into the Explicit Module path:
    • /ADF/apps/pt_calendar/customcf/manage_events_filtering_tools.cfm
  5. Add another Custom Script element to main content container of the page.
  6. From the Custom Script element interface, click the "Edit" icon.
  7. Enter the following text into the Explicit Module path:
    • /ADF/apps/pt_calendar/customcf/manage_calendar_event_details_header.cfm
  8. From the Datasheet element interface, click the "Datasheet" icon.
  9. From the "Datasheet Views" dialog, follow the "Click here to create a new datasheet view" link.
  10. Enter the following information and then click "Next":
    1. Name: All Event Details View
    2. Private: unchecked
    3. Default View: checked
    4. Description: View to manage events
    5. Datasheet Source: Form Result/Custom Element Sheet
  11. From the Datasheet Source dialog choose the "Calendar Event Details" custom element and click "Next".
  12. From the Datasheet Columns Dialog select the columns UniqueID, Title', EventDateTimeIDList, EventRecurrenceID, Category, Organization, EventApproved and AppovalUserID from the Available Columns list and move them to the Selected Columns list and then click "Finish".
  13. You will be brought to the Datasheet View page; click "Close" to return to your page.
  14. You will see the datasheet element on this page now. Click the Datasheet element interface icon again and this time choose "Edit Columns".
  15. Within the Datasheet View Column Properties dialog choose the UniqueID column and click "edit":
    1. In the Render Handler field, select the 'Change' button. Enter the following value into the Explicit Module text box:
      • /ADF/apps/pt_calendar/datasheet-modules/event-edit-delete-copy.cfm
    2. Click Finish or Save.
    3. In the Header field, switch the text to 'Edit/Delete/Copy'
    4. Click Finish or Save
  16. Now within the Datasheet View Column Properties dialog choose the EventDateTimeIDList column and click "edit":
    1. In the Render Handler field, select the 'Change' button. Enter the following value into the Explicit Module text box:
      • /ADF/apps/pt_calendar/datasheet-modules/convert-id-list-to-date-time-blocks.cfm
    2. Click Finish or Save.
    3. In the Header field, switch the text to 'Event Dates/Times'
    4. Click Finish or Save
  17. Now within the Datasheet View Column Properties dialog choose the EventRecurrenceID column and click "edit":
    1. In the Render Handler field, select the 'Change' button. Enter the following value into the Explicit Module text box:
      • /ADF/apps/pt_calendar/datasheet-modules/convert-id-list-to-recurrence-properties.cfm
    2. Click Finish or Save.
    3. In the Header field, switch the text to 'Recurrence Properties'
    4. Click Finish or Save
  18. Now within the Datasheet View Column Properties dialog choose the Category column and click "edit":
    1. In the Render Handler field, select the 'Change' button. Enter the following value into the Explicit Module text box:
      • /ADF/apps/pt_calendar/datasheet-modules/convert-id-list-to-cat-names-with-icons.cfm
    2. Click Finish or Save.
    3. In the Header field, switch the text to 'Categories'
    4. Click Finish or Save
  19. Now within the Datasheet View Column Properties dialog choose the Organization column and click "edit":
    1. In the Render Handler field, select the 'Change' button. Enter the following value into the Explicit Module text box:
      • /ADF/apps/pt_calendar/datasheet-modules/convert-id-list-to-org-names.cfm
    2. Click Finish or Save.
    3. In the Header field, switch the text to 'Organizations'
    4. Click Finish or Save
  20. Now within the Datasheet View Column Properties dialog choose the EventApproved column and click "edit":
    1. In the Render Handler field, select the 'Change' button. Enter the following value into the Explicit Module text box:
      • /ADF/apps/pt_calendar/datasheet-modules/convert-approval-status.cfm
    2. Click Finish or Save.
    3. In the Header field, switch the text to 'Approval Status'
    4. Click Finish or Save
  21. Now within the Datasheet View Column Properties dialog choose the AppovalUserID column and click "edit":
    1. In the Render Handler field, select the 'Change' button. Enter the following value into the Explicit Module text box:
      • /ADF/extensions/datasheet-modules/1.0/userID-to-name.cfm
    2. Click Finish or Save.
    3. In the Header field, switch the text to 'Approver'
    4. Click Finish or Save
    5. Click Finish or Save
  22. Close the Edit Column window.
  23. Go back to the Datasheet element interface, select the Layout button
    1. Default Sorting = TITLE Ascending
    2. Uncheck "Show Alphabet Characters for Filtering"
    3. Uncheck "Allow JavaScript data sorting"
    4. Click Save
  24. Publish this page.

Manage Events Grid

The Calendar Event can also be managed using the Calendar Event Grid view. This a custom management interface that does NOT use a datasheet. This view will be used to manage recurring events. The following steps will describe how to configure the custom scripts to manage the Calendar Events.

  1. Create a new page called 'Manage Calendar Events Grid' from the Base Plus One (or a Web Admin template) and in the /webadmin/calendar/ subsite.
  2. In the main content container of the page, add a Custom Script element.
  3. From the Custom Script element interface, click the "Edit" icon.
  4. Enter the following text into the Explicit Module path:
    • /ADF/apps/pt_calendar/customcf/manage_events_filtering_tools.cfm
  5. On the Parameters tab of the custom script element add following parameter:
    • editType=Grid        <---This is a very important
  6. Click Save
  7. Add another Custom Script element to main content container of the page.
  8. From the Custom Script element interface, click the "Edit" icon.
  9. Enter the following text into the Explicit Module path:
    • /ADF/apps/pt_calendar/customcf/manage_calendar_events_month_grid.cfm
  10. Click Save
  11. Publish this page.

Manage Page Mappings Datasheet - Optional

Only used with the Multiple View Page Mode

The Calendar Page Mapping element is a global custom element. Managing data for global custom elements can be configured easily through the use of Datasheets. The following steps will describe how to configure the datasheet to manage the Calendar Page Mapping element data.

  1. Create a new page called 'Manage Calendar Page Mappings' from the Base Plus One (or a Web Admin template) and in the /webadmin/calendar/ subsite.
  2. In the main content of the page, add a Custom Script element.
  3. From the Custom Script element interface, click the "Edit" icon.
  4. Enter the following text into the Explicit Module path:
    • /ADF/apps/pt_calendar/customcf/manage_page_mappings_header.cfm
  5. From the Datasheet element interface, click the "Datasheet" icon.
  6. From the "Datasheet Views" dialog, follow the "Click here to create a new datasheet view" link.
  7. Enter the following information and then click "Next":
    1. Name: All Page Mappings View
    2. Private: unchecked
    3. Default View: checked
    4. Description: View to manage All Page Mappings View
    5. Datasheet Source: Form Result/Custom Element Sheet
  8. From the Datasheet Source dialog choose the "Calendar Page Mapping" custom element and click "Next".
  9. From the Datasheet View Columns Dialog select the columns MapID, Subsite, OrgID, MonthlyGridPage, MonthlyListPage, WeeklyGridPage, WeeklyListPage, Daily Page and DetailsPage from the Available Columns list and move them to the Selected Columns list and then click "Finish".
  10. You will be brought to the Datasheet View page; click "Close" to return to your page.
  11. You will see the datasheet element on this page now. Click the Datasheet element interface icon again and this time choose "Edit Columns".
  12. Within the Datasheet View Column Properties dialog choose the MapID column and click "edit":
    1. In the Render Handler field, select the 'Change' button. Enter the following value into the Explicit Module text box:
      • /ADF/extensions/datasheet-modules/1.0/edit-delete.cfm
    2. Click Finish or Save.
    3. In the Header field, switch the text to 'Edit/Delete'
    4. Click Finish or Save
  13. Now within the Datasheet View Column Properties dialog choose the Subsite column and click "edit":
    1. In the Render Handler field, select the 'Change' button. Enter the following value into the Explicit Module text box:
      • /ADF/apps/pt_calendar/datasheet-modules/manage-convert-subsiteid-subsiteurl.cfm
    2. Click Finish or Save
  14. Now within the Datasheet View Column Properties dialog choose the OrgID column and click "edit":
    1. In the Render Handler field, select the 'Change' button. Enter the following value into the Explicit Module text box:
      • /ADF/apps/pt_calendar/datasheet-modules/convert-id-list-to-org-names.cfm
    2. Click Finish or Save
    3. In the Header field, switch the text to 'Organizations'
    4. Click Finish or Save
  15. Now within the Datasheet View Column Properties dialog choose the MonthlyGridPage column and click "edit":
    1. In the Render Handler field, select the 'Change' button. Enter the following value into the Explicit Module text box:
      • /ADF/extensions/datasheet-modules/1.0/pageID-to-link.cfm
    2. Click Finish or Save
  16. With the remaining columns MonthlyGridPage, MonthlyListPage, WeeklyGridPage, WeeklyListPage, Daily Page and DetailsPage repeat the steps from MonthlyGridPage
  17. Close the Edit Column window.
  18. Go back to the Datasheet element interface, select the Layout button
    1. Default Sorting = SUBSITE Ascending
    2. Uncheck "Show Alphabet Characters for Filtering"
    3. Uncheck "Allow JavaScript data sorting"
    4. Click Save
  19. Publish this page.