PT Photo Gallery ADF Configuration

Overview

The Photo Gallery Application is built within the ADF. The ADF must be installed in the site to run the Photo Gallery, follow the Site Configuration instructions.

Steps

• Make sure the ADF is setup and running on the site. If the ADF is not setup, then follow the instructions for ADF Site Configuration.
• Open the sites 'ADF.cfc' file in a text editor. Locate the Load the ADF Application into application space commentin the file. Add (or uncomment) the following command under the comment section:

loadApp("ptPhotoGallery");

• Reset the ADF for the server and site. Add the following URL parameter to any page within the site:

?ResetServerADF=1&ResetSiteADF=1

(If the site is completely new, you may have to create an index.cfm page first.)