PT Date Time Builder ADF Configuration

From ADF Docs
Revision as of 16:36, 15 December 2010 by Dbeckstrom (talk | contribs) (Created page with '== Overview == The Date Time Builder application is built within the ADF. The ADF must be installed in the site to run the Date Time Builder application, follow the ADF [[Instal…')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Overview

The Date Time Builder application is built within the ADF. The ADF must be installed in the site to run the Date Time Builder application, follow the ADF Installation instructions.

Steps

  • Make sure the ADF is setup and running on the site. If the ADF is not setup, then follow the instructions for ADF Installation.
  • Open the sites 'ADF.cfc' (See Site Configuration (ADF.cfc) for more info) file (located in your site's /_cs_apps/ directory) in a text editor. Locate the Load the ADF Application into application space comment in the file. Add (or uncomment) the following command under the comment section:
loadApp("ptDateTime");