Difference between revisions of "PT Link Builder Configuration"

From ADF Docs
Jump to: navigation, search
(Created page with '== Site Configuration == * Make sure the ADF is setup and running on the site. If the ADF is not setup, then follow the instructions for ADF Installation. * Open the sites 'A…')
 
Line 7: Line 7:
 
* [[Reset ADF|Reset the ADF]] for the server and site.
 
* [[Reset ADF|Reset the ADF]] for the server and site.
  
 +
== Element Import ==
 +
* Import the Link-Builder-Data-Custom-Element.zip
 +
 +
== Custom Field Type Import ==
 +
* Navigate to the CommonSpot administrator and open the Manage Custom Field Types dialog.
 +
* Import the Link Builder custom field type (link_builder/Link-Builder-Custom-Field-Type.zip).
 +
* Edit the properties and check the explicit module paths.  If the paths are not correct for unlock the field type and edit the explicit paths to use “/ADF/extensions/…”.
  
 
[[Category:Blogs]]
 
[[Category:Blogs]]

Revision as of 16:08, 28 January 2011

Site Configuration

  • Make sure the ADF is setup and running on the site. If the ADF is not setup, then follow the instructions for ADF Installation.
  • Open the sites 'ADF.cfc' ( See Site Configuration (ADF.cfc) for more info) file in a text editor. Locate the Load the ADF Application into application space comment in the file. Add the following command under the comment section:
loadApp("ptLinkBuilder");

Element Import

  • Import the Link-Builder-Data-Custom-Element.zip

Custom Field Type Import

  • Navigate to the CommonSpot administrator and open the Manage Custom Field Types dialog.
  • Import the Link Builder custom field type (link_builder/Link-Builder-Custom-Field-Type.zip).
  • Edit the properties and check the explicit module paths. If the paths are not correct for unlock the field type and edit the explicit paths to use “/ADF/extensions/…”.